TM-9-2320-260-34-2

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2

JULY 1994

TM-9-2320-260-34-2 - Page 311 of 863

TM 9-2320-260-34-2

15-66. HEATER WIRING HARNESS REPLACEMENT (Contd)

b. Installation

1. Position heater wiring harness (3) in van body (7). Ensure heater wiring harness (3) is routed

through clamp (5), twelve clamps (26), and two grommets (24).

2. Install wire (11) in 20-amp circuit breaker (9) with screw (10).

3. Install wire (13) in neutral bar (14) with setscrew (12).

4.

Install clamp (5) on mounting plate (6) with screw (4).

5. Install cover (2) on load center (8) with six screws (1).

6. Install two wires (16) on thermostat (17) with two screws (20).

7. Install thermostat (17) on control center box (15) with two screws (18).

8. Install thermostat cover (19) on thermostat (17).

9. Install two grommets (24) in van ceiling (21).

10. Connect two plugs (22) to heater (23).

11.

Secure heater wiring harness (3) to van ceiling (21) with twelve clamps (26) and screws (25).

15-250