TM-9-2320-260-34-2
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2
JULY 1994
TM-9-2320-260-34-2 - Page 649 of 863
TM 9-2320-260-34-2
Section V. TRANSFER POWER TAKEOFF MAINTENANCE
16-42. TRANSFER POWER TAKEOFF MAINTENANCE INDEX
1
PARA.
TITLE
PAGE
NO.
NO.
16-43.
Transfer Power Takeoff Replacement
16-250
16-44.
Transfer Power Takeoff Repair (M816)
16-254
16-45.
Transfer Power Takeoff Repair (M815, M819)
16-260
I
16-43. TRANSFER POWER TAKEOFF REPLACEMENT
I
THIS TASK COVERS:
a.
Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
M815, M816, M819
REFERENCES (TM)
LO 9-2320-260-12
TM 9-2320-260-20
TM 9-2320-260-34P-2
TOOK
General mechanic’s tool kit
(Appendix B, Item 1)
Torque wrench, 3/8-in. dr.
(Appendix B, Item 4)
EQUIPMENT CONDITION
●
Transfer PTO propeller shaft disconnected
(TM 9-2320-260-20).
●
Parking brakedrum removed (TM 9-2320-260-20).
●
Transfer oil drained (LO 9-2320-260-12).
MATERIALS/PARTS
Four lockwashers (Appendix D, Item 247)
Two lockwashers (Appendix D, Item 239)
Lockwasher (Appendix D, Item 223)
Gasket (Appendix D, Item 141)
Cotter pin (Appendix D, Item 48)
Safety wire (Appendix D, Item 375)
Antiseize tape (Appendix C, Item 50)
a.
Removal
NOTE
Perform step 1 for M815 and M819 vehicles
Remove cotter pin (23), pin (24), and link rod (22) from power takeoff shift lever (21). Discard
cotter pin (23).
Remove screw (17), lockwasher (18), clamp (19), and tube (14) from bracket (13). Discard
lockwasher (18).
Remove clamp (19) and grommet (15) from tube (14).
Disconnect tube
(14)
from adapter (7) and elbow (20).
Remove elbow (20) from transfer (1).
Remove two sleeve seals
(16)
from tube (14).
Remove two nuts (9), lockwashers (8), four screws (11), lockwashers (12), power takeoff (10), and
gasket (6) from transfer (l). Discard gasket (6) and lockwashers (8) and (12).
1.
2.
3.
4.
5.
6.
7.
16-250
Back to Top
