TM-9-2320-260-34-2
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2
JULY 1994
TM-9-2320-260-34-2 - Page 69 of 863
TM 9-2320-260-34-2
Section Il. WRECKER BODY MAINTENANCE
15-4. WRECKER BODY MAINTENANCE INDEX
PARA.
TITLE
PAGE
NO.
NO.
15-5.
Wrecker Body Replacement
15-8
15-6.
Rear Winch Rollers Repair
15-12
I
15-5. WRECKER BODY REPLACEMENT
THIS
TASK COVERS:
a.
Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
M816
TOOLS
General
mechanic’s tool kit
(Appendix B, Item 1)
Lifting
device
Two chains
Two guide lines
MATERIALS/PARTS
Sixteen locknuts (Appendix D, Item 186)
Eighteen locknuts (Appendix D, Item 183)
Eight locknuts (Appendix D, Item 169)
REFERENCES (TM)
TM 9-2320-260-34P-2
EQUIPMENT CONDITION
Crane turntable removed (para. 16-26).
GENERAL SAFETY INSTRUCTIONS
●
All personnel must stand clear during lifting
operations.
●
Ensure lifting capacity is greater than weight of
wrecker body.
NOTE
The left and right side body mounts are replaced the same. The art
shows the left side body mount.
1.
Remove four locknuts (12), two U-bolts (14), and two woodblocks (13) from frame rail (2) and
wrecker body (l). Discard locknuts (12).
2.
Remove four locknuts (15) and two U-bolts (16) from frame rail (2) and wrecker body (l). Discard
locknuts (15).
3. Remove four locknuts
(17), two
U-bolts (19), and four woodblocks (18) from frame rail (2) and
wrecker body (1). Discard locknuts (17).
4. Remove four locknuts (3), four mounting bolts (6), two plates (5), and four woodblocks
(4)
from
frame rail (2) and wrecker body (l). Discard locknuts (3).
5. Remove ten locknuts (10), screws (8), sixteen locknuts (9), screws (11), and two brackets (7) from
frame rail (2), Discard locknuts (10) and (9).
15-8
Back to Top
