TM-9-2320-260-34P-1
5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; REPAIR PARTS AND SPECIAL TOOLS LIST; VOLUME 1 OF 2
JANUARY 1992
TM-9-2320-260-34P-1 - Page 16 of 1025
TM 9-2320-260-34P-1
DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
REPAIR PARTS AND SPECIAL TOOLS LIST
(INCLUDING
1. Scope.
DEPOT MAINTENANCE REPAIR PARTS)
SECTION I. INTRODUCTION
This Repair Parts and Special Tool List, lists and authorizes spares and repair parts; special tools;
test; measurement, and diagnostic equipment (TMDE); and other special support equipment required for
performance of direct support and general support maintenance of the 5-ton, 6x6, M809 series vehicles. It
authorizes the requisitioning, issue, and disposition of spares, repair parts, and special tools as indicated by
the source, maintenance, and recoverability (SMR) codes.
2. General.
In addition to Section I, Introduction, this RPSTL is divided into the following sections:
a. Section II. Repair Parts List.
A list of spares and repair parts authorized by this RPSTL for use
in the performance of maintenance. The list also includes parts which must be removed for replacement of
the authorized parts. Parts lists are composed of functional groups in ascending alphanumeric sequence,
with the parts in each group listed in ascending figure and item number sequence. Bulk materials are listed
in item name sequence. Repair parts kits are listed separately in their own fictional group within Section
II. Repair parts for repairable special tools are also listed in this section. Items listed are shown on the
associated
illustration(s)/figure(s).
b.
Section III.
Special Tools List.
A list of special tools, TMDE, and other special support equipment
authorized by this RPSTL (as indicated by Basis of Issue (BOI) information in DESCRIPTION AND
USABLE ON CODE column) for the performance of maintenance.
c. Section IV. Cross-Reference Index.
A list, in National Item Identification Number (NIIN)
sequence, of all National stack numbered items appearing in the listing, followed by a list in alphanumeric
sequence of all part numbers appearing in the listings. National Stock Numbers and part numbers are cross-
-referenced to each illustration figure and item number appearance. The figure and item number index lists
figure and item numbers in alphanumeric sequence and cross-references National Stock Number, CAGEC,
and part numbers.
3. Explanation of Columns (Sections II and Ill).
a. Item No. (Column (1)).
Indicates the number used to identify items called out in the illustration.
b. SMR Code (Column (2)).
The Source, Maintenance, and Recoverability (SMR) code is a 5-position
code containing supply/requisitioning information, maintenance category authorization criteria, and
disposition instruction, as-shown in the following breakout:
Source
Maintenance
Code
Code
Who can install,
Who can do
replace or use
complete repair*
the item
on the item
Recoverability
Code
Who determines
disposition
action on an
unserviceable item
* Complete Repair: Maintenance capacity, capability, and authority to perform all corrective maintenance
tasks of the “Repair” function in a use/user environment in order to restore serviceability to a failed item.
1
Back to Top
