TM-9-2320-260-34P-1
5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; REPAIR PARTS AND SPECIAL TOOLS LIST; VOLUME 1 OF 2
JANUARY 1992
TM-9-2320-260-34P-1 - Page 20 of 1025
TM 9-2320-260-34P-1
5. Special Information.
a. Usable on Code.
The usable on code appears in the lower left corner of the Description column
heading. Usable on codes are shown as “UOC: . . . . . . .“ in the Description Column (justified left) on the
first line applicable item description/nomenclature. Uncoded items are applicable to all models.
Identification of the usable on codes used in the RPSTL are:
Code
Used On
Code
Used On
614
M815 W/W
629
M814 WO/W
620
M821 W/W
630
M820 WO/W
621
M812A1 W/W
631
M820A1 WO/W
622
M816 W/W
632
M820A2 WO/W
623
M810 W/W
633
M817 W/W
624
M810 WO/W
634
M818 W/W
625
M813 W/W
635
M818 WO/W
626
M813 WO/W
636
M819 W/W
627
M817 WO/W
637
M813A1 W/W
628
M814 W/W
638
M813A1 WO/W
b. Fabrication Instructions.
Bulk materials required to manufacture items are listed in the Bulk
Material Functional Group of this RPSTL. Part numbers for bulk materials are also referenced in the
description column of the line item entry for the item to be manufactured/fabricated. Detailed fabrication
instructions for items source codes to be manufactured or fabricated are found in TM 9-2320-260-34.
c. Assembly Instruction. Detailed
assembly instructions for items source coded to be assembled
from component spare/repair parts are found in TM 9-2320-260-20 and TM 9-2320-260-34. Items that make
up the assembly are listed immediately following the assembly item entry or reference is made to an
applicable figure.
d. Kits.
Line item entries for repair parts kits appear in Functional Group 9401 in Section II.
e. Index Numbers.
Items which have the word BULK in the figure column will have an index
number shown in the item number column. This index number is a cross-reference between the National
Stock Number/Part Number Index and the bulk material list in Section II.
f. Associated Publications.
The publications listed below pertain to the 5-ton, 6x6, M809 series
vehicles and their components:
LO 9-2320-260-12
Lubrication Order
TM 9-2320-260-10
Operator’s Manual
TM 9-2320-260-10HR
Hand Receipt, Operators Manual
TM 9-2320-260-20
Unit Maintenance Manual
TM 9-2320-260-34
Direct Support and General Support Maintenance Manual
TM 9-2320-260-20P
Unit Maintenance Repair Parts and Special Tools List
DMWR 9-3820-501
Deport Maintenance Work Requirements, Front and Rear Winch
Assemblies
DMWR 9-2520-508
Depot Maintenance Work Requirements, Front and Rear Axle Assemblies
g. Illustrations.
Item numbers on illustrations have been assigned in clockwise sequence, starting at
the 11 o’clock position (upper left).
6. How to Locate Repair Parts.
a. When National Stock Number or Part Number is Not Known.
(1) First.
Using the table of contents, determine the assembly group or subassembly group to which
the item belongs. This is necessary since figures are prepared for assembly groups and subassembly groups,
and listings are divided into the same groups.
(2) Second.
Find the figure covering the assembly group or subassembly group to which the item
belongs.
(3) Third.
Identify the item on the figure and use the Figure and Item Number Index to find the
NSN.
5
Back to Top
