TM-9-2320-272-10

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2004

CHANGE 2

TM-9-2320-272-10 - Page 212 of 481

TM 9-2320-272-10

2-111

(2)

For hazard warning lights (blinking lights):

(a)

Turn main switch lever (4) to STOP LIGHT position.

(b)

Depress hazard tab button (2) and move turn signal control lever (1)

up to lock tab button (2) in position.

(c)

To deactivate, move turn signal control lever (1) back to neutral.

Hazard tab button (2) will automatically disengage.

a.

General.

All M939/A1/A2 series vehicles are equipped with a tilt-forward

hood which provides easy access to the engine compartment.

b.

Raising and Securing Hood.

(1)

Release left and right hood latches (7).

(2)

Remove pin (11) from hood bracket (9) and swing bar (12) out.

(3)

Pull hood forward by grasping hood handle (8).

WARNING

Ensure pin is placed in end of retaining bar. Failure to do so may

damage vehicle, or cause injury or death.

(4)

Once hood is raised, secure bar (12) to bumper bracket (10) with pin (11).

c.

To lower and secure hood, reverse steps of task b, steps 1 through 4.

2-19. RAISING AND SECURING CAB HOOD

2-18. OPERATION OF VEHICLE SERVICE LIGHTS (Contd)