TM-9-2320-272-10

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2004

CHANGE 2

TM-9-2320-272-10 - Page 396 of 481

TM 9-2320-272-10

3-47

3-11. WHEELS AND TIRES (Contd)

(f)

Install nut (16) and two washers (17) on rim stud (21).

(g)

Install screw (31) and washer (30) in manifold (29) and hub (5).

(h)

Install one of two screws (36), washer (35), shield (12), and short end

of spacer (32), on manifold (29) and hub (5), and the second of two screws (36),

washer (35), shield (12), and long end of spacer (32) on hub (5).

(i)

Install two nuts (34) and washers (33) on shield (12) and rim studs

(19) and (23).

(j)

Tighten valve core (14) in tank valve (18) and install valve cap (13).

(k)

Start vehicle and select desired CTIS mission mode.

NOTE

• Check replaced tire to ensure tire inflates automatically.

• Report tire change to unit maintenance as soon as possible. Most

screws will require torquing to specific limits and O-ring seal will

have to be replaced.

(l)

Return jack (9), jack handle (7), wheel stud nut wrench (2), wrench

handle (1), and CTIS tools to tool compartment and remove chocks.

(m)

Secure damaged tire in spare tire carrier (para. 3-11b.).