TM 9-2320-272-10
3-44
3-11. WHEELS AND TIRES (Contd)
(f)
Remove nut (5) and two washers (6) from rim stud (10) and wheel valve (4).
(g)
Disconnect hose assembly (9) from turret valve (11).
(h)
On spare tire (30), remove valve core cap (32) and valve core (31)
from turret valve (29).
(5) Front Tire Removal (M939A2 series vehicles).
(a)
Remove CTIS tools from tool compartment.
(b)
Remove spare tire from vehicle.
WARNING
• Engage parking brake and chock wheels on both sides to keep
vehicle from rolling. Failure to do so may result in injury to per-
sonnel.
• Air in system is under pressure. Make sure engine is shut down
and air reservoirs are drained before disconnecting CTIS compo-
nents to prevent serious injury to personnel.
NOTE
Temporarily store CTIS assembly removed during this operation on
spare tire while removing damaged tire to prevent loss of critical parts.
(c)
Remove valve core cap (2) and valve core (3) from tank valve (7) to
exhaust air pressure from tire (19) and install valve core (3) securely back in tank
valve (7). Install valve core cap (2) on valve core (3).
(d)
Remove two nuts (26) and washers (25) from rim studs (8) and (12).
(e)
Remove two screws (28), washers (27), shield (1), and spacer (24)
from hub (14).