FIELD MAINTENANCE
SYSTEM OVER-INFLATES TIRES
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(Volume 5, WP
0826, Table 1, Item 56)
Multimeter
(Volume 5, WP
0826, Table 1, Item 34)
Test Set, Electronic Systems
(Volume 5, WP
0826, Table 1, Item 51)
Personnel Required
(2)
References
Point to Point Schematics
References (cont.)
WP
0006
Volume 2, WP
0322
Volume 5, WP
0812
Volume 5, WP
0813
Equipment Condition
Vehicle parked and engine shut down.
(TM
9-2320-272-10)
TROUBLESHOOTING PROCEDURE
SYSTEM OVER-INFLATES TIRES
NOTE
•
Conduct these malfunction tests if the system over-inflates tires. This procedure will
check for a faulty CTIS wiring harness, Electronic Control Unit (ECU), and pressure
transducer.
•
The ECU is programmed in conjunction with vehicle air compressor output. This
procedure requires air source supplied by vehicle for accurate diagnosis.
TM 9-2320-272-23-1
0152
0152-1