TM-9-2320-272-23-1

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 1 OF 5

SEPTEMBER 2012

  TM-9-2320-272-23-1 - Page 1278 of 1313

SYSTEM OVER-INFLATES TIRES - Continued
CAUTION
Do not operate CTIS while vehicle is connected to an external air source. This may result
in over-inflation or damage to tires.
c.
Remove external air source and run CTIS.
d.
Manually measure the pressure in each tire with a pressure gauge to locate all over-inflated tires and to
determine the accuracy of system pressure reading.
CONDITION/INDICATION
DO TIRE PRESSURES REMAIN THE SAME AFTER MANUALLY BALANCING TIRE PRESSURE?
DECISION
YES - Go to Step (5) to verify problem is solved.
NO - Go to Step (2).
TM 9-2320-272-23-1
0152
0152-3


Back to Top