SLOW AIR RECOVERY OR OCCASIONAL LOW AIR WARNING DURING BRAKING - Continued
b.
Disconnect harness lead at the pressure switch.
c.
Set multimeter to measure resistance.
d.
Connect multimeter red lead to CTIS wiring harness cannon plug.
e.
Connect multimeter black lead to electrical lead at pressure switch.
f.
Meter reading should be less than 200 ohms.
CONDITION/INDICATION
IS THERE CONTINUITY BETWEEN PRESSURE SWITCH AND CTIS WIRING HARNESS CANNON PLUG
AT ECU?
DECISION
YES - Go to Step (3).
NO - Replace faulty CTIS wiring harness (Volume 2, WP
0322). Go to Step (6) to verify problem is solved.
TM 9-2320-272-23-1
0153
0153-5