TM-9-2320-272-23-1

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 1 OF 5

SEPTEMBER 2012

  TM-9-2320-272-23-1 - Page 672 of 1313

FIELD MAINTENANCE
WRECKER HYDRAULIC SYSTEM DOES NOT OPERATE
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(Volume 5, WP
0826, Table 1, Item 56)
Test Set, Electronic Systems
(Volume 5, WP
0826, Table 1, Item 51)
Personnel Required
(2)
References
Point to Point Schematics
References (cont.)
TM 9-2320-272-10
Volume 4, WP
0711
Volume 4, WP
0728
Volume 5, WP
0820
Equipment Condition
Vehicle parked and engine shut down.
(TM
9-2320-272-10)
TROUBLESHOOTING PROCEDURE
WRECKER HYDRAULIC SYSTEM DOES NOT OPERATE
NOTE
Conduct these malfunction tests if hydraulic system does not operate. This procedure
will check for improper oil level, power takeoff condition, hydraulic lines for leaks and oil
leaks from reservoir drain plug and valves.
Rear winch controls must be in neutral for crane operation.
TM 9-2320-272-23-1
0072
0072-1


Back to Top