REMOVAL
1.
Disconnect air line (Figure 2, Item 10) from elbow (Figure 2, Item 7).
2.
Remove elbow (Figure 2, Item 7) and adapter (Figure 2, Item 9) from union (Figure 2, Item 8).
3.
Loosen three screws (Figure 2, Item 1) on bracket (Figure 2, Item 5).
4.
Loosen jamnut (Figure 2, Item 2) on adjusting screw (Figure 2, Item 3).
5.
Push fan pulley bracket (Figure 2, Item 5) toward accessory drive pulley (Figure 2, Item 6) and remove two
fan drivebelts (Figure 2, Item 4).
TM 9-2320-272-23-2
0297
0297-4