TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 1133 of 1417
INSTALLATION
NOTE
•
Steps (1) and (2) are for M939/A1 vehicles only.
•
Assistant will help with Step (1).
1.
Install gasket (Figure 2, Item 4), spacer (Figure 2, Item 5), gasket (Figure 2, Item 6), and starter
(Figure
2,
Item
9) on flywheel housing (Figure 2, Item 3) with two washers (Figure 2, Item 7) and screws
(Figure
2,
Item
8). Tighten screws 55 lb-ft (75 N·m).
2.
Install screw-assembled washer (Figure 2, Item 1) in starter (Figure 2, Item 9).
NOTE
•
Steps (3) and (4) are for M939A2 vehicles only.
•
Assistant will help with Step (4).
3.
Install three sleeves (Figure 2, Item 28) on starter (Figure 2, Item 9).
4.
Install gasket (Figure 2, Item 4), spacer (Figure 2, Item 5), gasket (Figure 2, Item 6), and starter
(Figure
2,
Item
9) on flywheel housing (Figure 2, Item 3) with three washers (Figure 2, Item 7) and screws
(Figure
2,
Item
8). Tighten screws 55 lb-ft (75 N·m).
NOTE
Step (5) is for M939/A1 vehicles only.
5.
Install wire (Figure 2, Item 19) on solenoid (Figure 2, Item 2) with clip (Figure 2, Item 20) and screw
(Figure
2,
Item
21).
NOTE
Step (6) is for M939A2 vehicles only.
6.
Install wire (Figure 2, Item 27) on starter (Figure 2, Item 9) with lockwasher (Figure 2, Item 26) and nut
(Figure
2,
Item
25).
NOTE
Ground strap will be present on M939/A1 vehicles only.
7.
Install ground strap (Figure 2, Item 10) and wires (Figure 2, Items 11 and 14) on starter (Figure 2, Item 9) with
lockwasher (Figure 2, Item 13) and nut (Figure 2, Item 12).
8.
Install wires (Figure 2, Items 15 and 18) on solenoid (Figure 2, Item 2) with a lockwasher (Figure 2, Item 17)
and nut (Figure 2, Item 16).
NOTE
Step (6) is for M939A2 vehicles only.
9.
Install wire (Figure 2, Item 22) on solenoid (Figure 2, Item 2) with lockwasher (Figure 2, Item 23) and nut
(Figure
2,
Item
24).
TM 9-2320-272-23-2
0303
0303-4
Back to Top
