INSTALLATION
NOTE
Steps (1) and (2) apply to both switches.
1.
Connect harness connector (Figure 2, Item 2) to main light switch (Figure 2, Item 1).
2.
Install main light switch (Figure 2, Item 1) on instrument panel (Figure 2, Item 3) with four screws
(Figure
2,
Item
4).
NOTE
Step (3) applies to three lever switch.
3.
Install three washers (Figure 2, Item 5) and switch levers (Figure 2, Item 6) on main light switch
(Figure
2,
Item
1) with three washers (Figure 2, Item 7) and screws (Figure 2, Item 8).
TM 9-2320-272-23-2
0315
0315-4