REMOVAL - Continued
10.
Disconnect lead (Figure 2, Item 2) from circuit breaker (Figure 2, Item 1).
11.
Remove two screws (Figure 2, Item 5) and clamps (Figure 2, Item 4) from wiring harness (Figure 2, Item 3)
and van body (Figure 2, Item 12).
12.
Remove two screws (Figure 2, Item 3) and clamps (Figure 2, Item 6) from wiring harness (Figure 2, Item 3)
and van body (Figure 2, Item 12).
13.
Remove locknut (Figure 2, Item 8), screw (Figure 2, Item 15), clamp (Figure 2, Item 14), and wiring harness
(Figure 2, Item 3) from spare tire carrier bracket (Figure 2, Item 7). Discard locknut.
14.
Remove nut (Figure 2, Item 11) and wire (Figure 2, Item 10) from positive battery terminal (Figure 2, Item 9).
TM 9-2320-272-23-4
0658
0658-4