TM-9-2320-272-23-4

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-4 - Page 625 of 1393

REPAIR

For wiring harness repair, refer to (Volume 3, WP

0352).

END OF TASK

INSTALLATION

1.

Position wiring harness (Figure 2, Item 4) on van body (Figure 2, Item 12).

2.

Install three wires (Figure 2, Item 3) on switch (Figure 2, Item 13) and tighten three screws (Figure 2, Item 10).

3.

Install switch (Figure 2, Item 15) on van body (Figure 2, Item 12) with two screws (Figure 2, Item 14).

4.

Install cover (Figure 2, Item 9) on switch (Figure 2, Item 13) with two screws (Figure 2, Item 8).

5.

Install wire (Figure 2, Item 11) on 30 amp circuit breaker (Figure 2, Item 7) with screw (Figure 2, Item 15).

6.

Install two wires (Figure 2, Item 3) on 3-pole circuit breaker (Figure 2, Item 5) with two setscrews

(Figure

2,

Item

16).

7.

Install cover (Figure 2, Item 2) on load center (Figure 2, Item 6) with six screws (Figure 2, Item 1).

TM 9-2320-272-23-4

0657

0657-4