TM-9-2320-272-23-5
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 5 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-5 - Page 41 of 623
REMOVAL - Continued
NOTE
Step (5) is not required for M932/A1/A2 vehicles.
5.
Remove nut (Figure 2, Item 4), lockwasher (Figure 2, Item 3), washer (Figure 2, Item 2), eyebolt
(Figure
2,
Item
1), washer (Figure 2, Item 2), and eyebolt plate (Figure 2, Item 6) from rear cargo bed
(Figure
2,
Item
5). Discard lockwasher.
6.
Lower A-frame legs (Figure 2, Item 13) and (Figure 2, Item 18) on front bumper (Figure 2, Item 14) to ground.
7.
Remove nut (Figure 2, Item 22), nut (Figure 2, Item 7), washer (Figure 2, Item 8), harness (Figure 2, Item 21),
and leg spacer (Figure 2, Item 9) from each end of spreader tube stud (Figure 2, Item 10).
8.
Remove spreader tube stud (Figure 2, Item 10) and spread tube (Figure 2, Item 12) from two leg extension
tubes (Figure 2, Item 11).
9.
Remove two safety pins (Figure 2, Item 19) from pins (Figure 2, Item 20).
10.
Remove two pins (Figure 2, Item 20) and detach leg extension tubes (Figure 2, Item 11) from A-frame legs
(Figure 2, Items 13 and 18).
11.
Remove two safety pins (Figure 2, Item 16) from pins (Figure 2, Item 17).
12.
Remove two pins (Figure 2, Item 17) from two front brackets (Figure 2, Item 15).
13.
Remove A-frame legs (Figure 2, Items 13 and 18) from two front brackets (Figure 2, Item 15).
TM 9-2320-272-23-5
0772
0772-4
Back to Top
