TM-9-2320-272-23-5
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 5 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-5 - Page 55 of 623
CHEMICAL AGENT ALARM WIRING HARNESS REMOVAL - Continued
4.
Disconnect harness cable positive wire (Figure 2, Item 4) from power circuit wire (Figure 2, Item 3) in engine
compartment at wiring harness (Figure 2, Item 1).
5.
Remove screw (Figure 2, Item 9), clamp (Figure 2, Item 5), lockwasher (Figure 2, Item 6), and ground wires
(Figure 2, Item 7) and (Figure 2, Item 8) from protective control box (Figure 2, Item 2). Discard lockwasher.
6.
Remove wire (Figure 2, Item 11) from grommet (Figure 2, Item 12) and floor (Figure 2, Item 10) behind
driver's
seat.
TM 9-2320-272-23-5
0774
0774-4
Back to Top
