REMOVAL - Continued
13.
Remove two cotter pins (Figure 5, Item 8) and pin (Figure 5, Item 10) from top hole in right front post assembly
(Figure 5, Item1). Discard cotter pins.
14.
Remove three locknuts (Figure 5, Item 6) and screws (Figure 5, Item 9) from right front post assembly
(Figure
5,
Item 1) and right post support (Figure 5, Item 7). Lift right front post assembly out of right front post
support. Discard locknut.
15.
Remove five locknuts (Figure 5, Item 4) and screws (Figure 5, Item 5) from right post support
(Figure
5,
Item
3) and right front brace assembly (Figure 5, Item 2). Discard locknuts.
TM 9-2320-272-23-5
0775
0775-6