TM-9-2320-272-24-1

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 1 OF 4

JUNE 1998

  TM-9-2320-272-24-1 - Page 476 of 1015

TM 9-2320-272-24-1
3-33. ETHER START SWITCH REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TOOLS
TM 9-2320-272-24P
General mechanic’s tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
l
Parking brake set (TM 9-2320-272-10).
l
Battery ground cables disconnected (para. 3-126).
NOTE
Prior to removal, tag wires for installation.
1.
Disconnect two ether start switch wires (3) from harness wires (2) under left side of dash (1).
2.
Remove nut (5) and ether start switch (4) from left side of dash (1).
b. Installation
1.
Install ether start switch (4) on left side of dash (1) with nut (5).
2.
Connect two ether start switch wires (3) to wiring harness wires (2) under left side of dash (1).
FOLLOW-ON TASK: Connect battery ground cables (para. 3-126).
3-112


Back to Top