TM-9-2320-272-24-1
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 1 OF 4
JUNE 1998
TM-9-2320-272-24-1 - Page 635 of 1015
3-96. FUEL
TM 9-2320-272-24-1
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
All
TOOLS
REFERENCES (TM)
TM 9-2320-272-10
TM 9-2320-272-24P
General mechanic’s tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
MATERIALS/PARTS
Parking brake set (TM 9-2320-272-10).
Left splash shield removed (TM 9-2320-272-10).
Antiseize tape (Appendix D, Item 72)
Battery ground cables disconnected (para. 3-126).
1.
Disconnect fuel pressure transducer connector (4) from harness wire (1).
2.
Remove fuel pressure transducer (2) from fuel pump (3).
NOTE
Male pipe threads must be wrapped with antiseize tape before
installation.
1.
Install fuel pressure transducer (2) on fuel pump (3).
2.
Connect fuel pressure transducer connector (4) to harness wire (1).
FOLLOW-ON TASKS:
Connect battery ground cables (para. 3-126).
Start engine (TM 9-2320-272-10) and check fuel pressure gauge for proper operation.
Install left splash shield (TM 9-2320-272-10).
3-271
Back to Top
