TM-9-2320-272-24-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 2 OF 4
JUNE 1998
TM-9-2320-272-24-2 - Page 466 of 991
TM 9-2320-272-24-2
3-419. DECONTAMINATION (M13) APPARATUS MOUNTING BRACKET KIT
REPLACEMENT
THIS TASK COVERS:
a. Removal (M929/A1/A2, M930/A1/A2,
M931/A1/A2, M932/A1/A2)
b. Installation (M929/A1/A2, M930/A1/A2,
M931/A1/A2, M932/A1/A2)
c. Removal (M934/A1/A2)
d. Installation (M934/A1/A2)
e. Removal (M936/A1/A2)
f. Installation (M936/A1/A2)
g. Removal (M923/A1/A2, M925/A1/A2,
M927/A1/A2, M928/A1/A2)
h. Installation (M923/A1/A2, M925/A1/A2,
M927/A1/A2, M928/A1/A2)
INITIAL SETUP:
APPLICABLE MODELS
AI1
TOOLS
General mechanic’s tool kit (Appendix E, Item 1)
MATERIALS/PARTS
Four locknuts (M929/A1/A2, M930lA1/A2,
M93l/A1/A2, M932/A1/A2)
(Appendix D, Item 291)
Eight locknuts (M934/A1/A2, M936/A1/A2)
(Appendix D, Item 291)
Four locknuts (M934/A1/A2)
(Appendix D, Item 294)
Four locknuts (M939/A1/A2)
(Appendix D, Item 291)
Seventeen locknuts (M923/A1/A2, M925/A1/A2,
M927/A1/A2, M928/A1/A2)
(Appendix D, Item 291)
REFERENCES (TM)
TM 9-2320-272-10
TM 9-2320-272-24P
EQUIPMENT CONDITION
• Parking brake set (TM 9-2320-272-10)
• Spare tire removed (TM 9-2320-272-10).
a. Removal (M929/A1/A2, M930/A1/A2, M93l/A1/A2, M932/Al/A2)
Remove four locknuts (5), screws (2), washers (3), mounting bracket (l), and two supports (6) from deck
plate (4). Discard locknuts (5).
b. Installation (M929/A1/A2, M930/A1/A2, M931/A1/A2, M932/A1/A2)
Install two supports (6) and mounting bracket (1) on deck plate (4) with four washers (3), screws (2), and
new locknuts (5).
c. Removal (M934/A1/A2)
1.
Remove four locknuts (10), screws (9), washers (8), mounting bracket (11, and four washers (8) from
support bracket (7). Discard locknuts (10).
2.
Remove four locknuts (12), screws (11), and support bracket (7) from right frame rail (13). Discard
locknuts (12).
d. Installation (M934/A1/A2)
1.
Install support bracket (7) on right frame rail (13) with four screws (11) and new locknuts (12).
2.
Install four washers (8) and mounting bracket (1) on support bracket (7) with four washers (8),
screws (9), and new locknuts (10).
3-1074
Back to Top
