TM-9-2320-272-24-3

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 3 OF 4

JUNE 1998

TM-9-2320-272-24-3 - Page 272 of 799

TM 9-2320-272-24-3

4-94. TRANSFER CASE REPLACEMENT (Contd)

22.

Connect speedometer drive cable (7) to speedometer drive adapter (9).

23.

Install clamp (6) and speedometer drive cable (7) on transfer case (8) with washer (5) and screw (4).

24.

Install parking brake cable (3) on parking brake lever (13) with new locknut (12).

25.

Install parking brake cable (3) and spacer (14) on parking brake cable bracket (11) with clamp (2),

two screws (1), and new locknuts (10).

26.

Install propeller shaft (20) on transfer case front output flange (17) with eight screws (18) and new

locknuts (19). Tighten locknuts (19) 32-40 lb-ft (43-54 N•m).

27.

Install propeller shaft (15) on transfer case input flange (16) with four new lockwashers (21) and

screws (22). Tighten screws (22) 32-40 lb-ft (43-54 N•m).

FOLLOW-ON TASKS:

l

Install transfer case shift rod (para. 4-88).

l

Install transfer case front axle engagement control valve (para. 3-144).

l

Install transfer case interlock valve (para. 3-143).

l

Install transfer case-to-forward rear axle propeller shaft (para. 3-149).

l

Install wet reservoir (para. 3-185).

l

Install spare tire (M923/A1/A2, M925/A1/A2, M929/A1/A2, and M930/A1/A2)

(TM 9-2320-272-10).

l

Adjust parking brake (TM 9-2320-272-10).

l

Fill transfer case to proper fluid level (LO 9-2320-272-12).

4-536