TM-9-2320-272-24-4

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 4 OF 4

JUNE 1998

TM-9-2320-272-24-4 - Page 506 of 836

TM 9-2320-272-24-4

5-75. INTERIOR SIDE PANELS AND LATCHES REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

M934/A1/A2

TOOLS

REFERENCES (TM)

TM 9-2320-272-10

TM 9-2320-272-24P

General mechanic’s tool kit (Appendix E, Item 1)

EQUIPMENT CONDITION

MATERIALS/PARTS

l

Parking brake set (TM 9-2320-272-10).

l

Van body sides fully expanded and secured

Two cotter pins (Appendix D, Item 51)

Gasket (Appendix D, Item 231)

Three grommets (Appendix D, Item 251)

Six lockwashers (Appendix D, Item 364)

O-ring (Appendix D, Item 479)

Four rubber bumpers (Appendix D, Item 563)

Primer (Appendix C, Item 57)

Sealing compound (Appendix C, Item 67)

Adhesive (Appendix C, Item 7)

(TM 9-2320-272-10).

l

Hinged end panels removed (para. 4-155).

l

Hinged floor removed (para. 5-72).

l

Hinged roof removed (para. 5-77).

l

Side doors removed (para. 5-70).

SPECIAL ENVIRONMENTAL CONDITIONS

Vehicle must be on a level surface.

NOTE

Left and right interior side panels are replaced the same way. This

procedure is for right interior side panel.

1.

Remove six screws (1) and three hooks (2) from side panel frame (3).

2.

Remove six screws (5) and three clips (6) from side panel frame (3).

3.

Remove two screws (8) and striker (7) from side panel frame (3).

4.

Remove two nuts (4), screws (10), lockwashers (11), and door check assembly (9) from door

angle (15). Discard lockwashers (11).

5.

Remove two screws (12), striker (13), and two spacer plates (14) from side panel frame (3).

5-500