TM-9-2320-272-24-4

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 4 OF 4

JUNE 1998

TM-9-2320-272-24-4 - Page 590 of 836

TM 9-2320-272-24-4

5-94. EMERGENCY LAMP WIRING HARNESS REPLACEMENT (Contd)

10.

Disconnect lead (2) from circuit breaker (1).

11.

Remove two screws (5) and clamps (4) from wiring harness (3) and van body (12).

12.

Remove two screws (11) and clamps (6) from wiring harness (3) and van body (12).

13.

Remove locknut (8), screw (10), clamp (9), and wiring harness (3) from spare tire carrier bracket (7).

Discard locknut (8).

14.

Remove nut (13) and wire (15) from positive battery terminal (14).

b. Installation

1.

Install wire (15) on positive battery terminal (14) with nut (13).

2.

Install wiring harness (3) on spare tire carrier bracket (7) with clamp (9), screw (10), and new

locknut (8).

3.

Install two clamps (6) on wiring harness (3) and van body (12) with two screws (11).

4.

Install two clamps (4) on wiring harness (3) and van body (12) with two screws (5).

5.

Connect lead (2) to circuit breaker (1).

5-584