TM-9-2320-272-24-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 4 OF 4
JUNE 1998
TM-9-2320-272-24-4 - Page 596 of 836
TM 9-2320-272-24-4
5-96. 400 HZ SUPPLY WIRING HARNESS REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
M934/A1/A2
TM 9-2320-272-10
TOOLS
TM 9-2320-272-24P
General mechanic’s tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
MATERIALS/PARTS
l
Parking brake set (TM 9-2320-272-10).
Sealing compound (Appendix C, Item 62)
l
Battery ground cables disconnected (para. 3-126).
l
Ceiling filter and side panels removed (para. 5-79).
a. Removal
NOTE
Tag wires for installation.
1.
Remove four screws (1) and upper cover (2) from control center box (10).
2.
Remove four screws (5) and lower cover (4) from control center box (10).
3.
Remove screw (11) and wire (8) from terminal (9).
4.
Remove three screws (3) and wires (7) from circuit breaker (6).
5-590
Back to Top
