TM-9-2320-272-24-4

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 4 OF 4

JUNE 1998

TM-9-2320-272-24-4 - Page 602 of 836

5-97. BRANCHED

TM 9-2320-272-24-4

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

EQUIPMENT CONDITION

M934/A1/A2

TOOLS

Parking brake set (TM 9-2320-272-10).

Battery ground cables disconnected (para. 3-126).

Ceiling filter and side panels removed (para. 5-79).

General mechanic’s tool kit (Appendix E, Item 1)

REFERENCES (TM)

TM 9-2320-272-10

TM 9-2320-272-24P

NOTE

Tag wires for installation.

1.

Remove four screws (1) and upper cover (2) from control center box (6).

2.

Remove two screws (3) and wires (4) from terminal (5).

3.

Remove six screws (10) and clamps (9) from branched 400 Hz receptacle harness (8) and van

ceiling (7).

1.

Install 400 Hz branched receptacle harness (8) on van ceiling (7) with six clamps (9) and screws (10).

2.

Install two wires (4) on terminal (5) with two screws (3).

3.

Install upper cover (2) on control center box (6) with four screws (1).

5-596