Table 17. Cab Floor Mounted Controls
.
1
2
3
4
5
Figure 17. Cab Floor Mounted Controls.
Key
Control/Indicator
Function
1.
Headlamp Dimmer
Switch
To operate the service lamp high beams, pull the LIGHTS
switch out to the second position and depress and release
the floor-mounted foot switch. The HIGH BEAM
indicator on the control panel will illuminate blue when
the high beams are on. To dim head lamps, depress and
release foot switch again.
2.
Decontamination
Apparatus
NOTE
The decontamination apparatus is used to spray a
decontaminating agent on vehicles and equipment to
reduce levels of chemical toxic agents to the
minimum extent to make them safe and allow for
their continued operation.
On M915 through M920 vehicles, a decontamination
apparatus is mounted under the lower control panel. To
use, remove from bracket, pull ring pin, lift handle
until it locks, aim and press top. Maintenance
requirements are in TM 3-4230-204-12&P.
3.
Accelerator Pedal
To increase engine speed, place right foot on
floor-mounted accelerator pedal and press down
gradually. To reduce engine speed, let up on pedal.
TM 9-2320-273-10
0005
0005-22