TM-9-2320-273-10

TRUCK, TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; OPERATOR’S MANUAL

DECEMBER 2012

TM-9-2320-273-10 - Page 363 of 452

OPERATOR MAINTENANCE

CLEANING BALLISTIC GLASS

INITIAL SETUP:

Materials/Parts

Cleaning compound, windshield

(WP 0039, Item 7)

Rag, wiping (WP 0039, Item 25)

Equipment Condition

Vehicle parked on level ground

(WP 0011).

Equipment Condition - Continued

Engine off (WP 0011).

Parking brake set (WP 0011).

CLEANING

CAUTION

Remove rings or other hard objects from hands before

cleaning ballistic glass. DO NOT use hard, dirty, or gritty

cloths on ballistic glass. DO NOT apply water or cleaning

compound unless ballistic glass is cool and protected from

heating effects of sunlight. Failure to follow these

instructions will damage ballistic glass.

Do not use bug spray or other aerosol sprays on or near

ballistic glass. Failure to follow these instructions will

damage ballistic glass.

NOTE

Follow this procedure to clean inner plastic laminate surfaces

of ballistic glass. Clean outside surfaces of ballistic glass in

the same manner as plain glass.

1. Add cleaning compound to 1 gal. (3.8 L) of water as directed by manufacturer

label.

2. Saturate a soft, clean cloth with cleaning solution and lightly rub plastic surfaces.

3. Flush off cleaning solution with water and dry with a soft, clean cloth.

END OF TASK

END OF WORK PACKAGE

TM 9-2320-273-10

0027

0027-1/2 blank