TM-9-2320-273-10

TRUCK, TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; OPERATOR’S MANUAL

DECEMBER 2012

TM-9-2320-273-10 - Page 384 of 452

INSTALLING SPARE WHEEL AND TIRE ON CARRIER (M915, M916, AND M915A1) -

CONTINUED

4.

Install wheel and tire assembly (Figure 10, Item 1) on spare tire carrier

(Figure 10, Item 2).

NOTE

After wheel and tire assembly has been secured, cable may

be slightly loose but should remain attached to wheel and

tire assembly.

Crank handle must be in 12 or 6 o’clock position when not

in use to avoid possible interference with trailer.

5. Install bolt (Figure 10, Item 4) on tire carrier base (Figure 10, Item 3).

6. Raise spare tire carrier side panel (Figure 11, Item 1) and install wing nut

(Figure 11, Item 3) on bolt (Figure 11, Item 2).

7. Connect tractor-to-trailer electrical cable connector to trailer.

8. Release parking brake and remove wheel chocks (WP 0011).

TM 9-2320-273-10

0030

0030-10