TM-9-2320-273-34
TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1980
TM-9-2320-273-34 - Page 17 of 801
TM 9-2320-273-34
CHAPTER 2
MAINTENANCE INSTRUCTIONS
Section 1. REPAIR PARTS, SPECIAL TOOLS, AND EQUIPMENT
2-1. Special Tools and Equipment. Special tools and equipment specified for use in this manual are listed
in TM 9-2320-273-34P, Direct Support and General Support Repair Parts and Special Tools List.
2-2. Repair Parts. Repair parts are listed and illustrated in the Repair Parts and Special Tools list covering
Direct Support and General Support Maintenance, TM 9-2320-273-34P.
2-3. Fabricated Tools and Equipment. (See Table 2-1.)
Table 2-1. Fabricated Tools and Equipment
MATERIALS
DESCRIPTION
USE
AND DETAIL DRAWING
1.
Adjustment Gage
Starter Adjustment
Fig, 5-39
2.
Timing Gage
Starter Timing
Fig. 5-39
3.
Test Set
Transmission Testing
Fig. 7-54
4.
Bushing Removal/
Replace Steering
Fig. 9-7
Installation Tool
Knuckle Bushings
,
Section Il. TROUBLESHOOTING
2-4. Introduction. This section provides procedures to troubleshoot vehicle systems, assemblies, and
components for which repairs are authorized at Direct Support and General Support maintenance level.
These procedures supplement the following troubleshooting procedures for the M915 series vehicles.
a.
Operator/crew level (TM 9-2320-273-10)
b.
Organizational level (TM 9-2320-273-20)
c.
Engine Direct Support and General Support level (TM 9-2815-222-34 & P)
2-1
Back to Top
