TM 9-2320-273-34
Table 24. Transfer Assembly Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
TRANSFER WILL NOT SHIFT INTO GEAR.
Step 1.
Check for broken diaphragm in declutch air chamber.
Replace diaphragm (para 8-3 C).
Step 2.
Check for broken or bent shift rod (see fig. 8-11).
Replace faulty component (para 8-3 through 8-6).
Step 3.
Check for damaged or worn internal case components.
Replace faulty components (para 8-3 through 8-6).
2.
TRANSFER WILL NOT STAY IN GEAR.
Check for damaged or worn internal case components.
Replace faulty components (para 8-3 through 8-6).
3.
EXCESSIVE NOISE DURING OPERATION.
Check for damaged or worn internal case components.
Replace faulty components (para 8-3 through 8-6).
4.
LUBRICANT LEAKING.
Step 1.
Check for defective seals or gaskets.
Replace seals or gaskets (para 8-3 through 8-6).
Step 2.
Check for cracked case.
Replace defective case (para 8-3 through 8-6).
2-9