TM9-2320-273-34
z.
Remove ten bolts (1, fig. 7-18) and lift off plate assembly (6) and cover (5). Remove the gasket
from the plate.
NOTE
LEGEND:
Piston and valve assemblies (2), (3), and
(4) can be cleaned or replaced. Cut the stem
to remove the valve from the piston. Remove
the O-ring seals from the piston. (There is a
spring under piston (3)).
1.
BOLT (10)
2. PISTON & VALVE ASSEMBLY
3. PISTON, VALVE AND
SPRING ASSEMBLY
4. PISTON & VALVE ASSEMBLY
5. COVER
6. PLATE ASSEMBLY
Figure 7-18. Remove Plate Assembly.
TA 074069
7-19