TM9-2320-273-34
j.
Remove snapring (4, fig. 7-8). Remove clamp (7) by removing two screws (5); then remove
spring housing assembly (6).
k.
Remove two screws (1) and guide (2) from the base.
/.
Remove two screws and starwashers (9), retainer (8) and lift off plate (10). Remove the shims
located under the retainer (8).
LEGEND:
1.
SCREW (2)
2. GUIDE
3. LEVER
4. SNAP RING
5. SCREW (2)
6. SPRING HOUSING
ASSEMBLY
7. CLAMP
8. RETAINER
9. SCREW AND STARWASHER (2)
10.
PLATE
TA 074059
Figure 7-8. Remove Spring Housing, Guide, and Retainer.
7-9