TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 768 of 801

TM9-2320-273-34

h.

Using chalk line, mark 10 diagonal lines (1) as shown (fig. 24-3).

.

i. Diagonal lines (1) should cross at center line (1) as shown at point (3). If lines (1) cross more than

1/8 inch from center line, frame is bent (fig. 24-3).

1

2

3

TA218711

Figure

24-3.

Checking Parallel Alinement of Frame.

24-3. Inspection and Repair of Frame.

a. Check that frame rails are not cracked, bent or misalined. Check that cross members have no cracks

or damage. If they are damaged refer to TB 9-2300-24740.

b. Check that all riveted joints have no cracks or broken rivets. If they are damaged refer to TB 9-

2300-247-40.

c. Check that all bolted brackets and supports are not cracked or damaged. Repair if damaged. Refer

to TM 9-237 for welding procedures and to TB 9-2300-24740.

Change 1

24-3/24-4 (Blank)