M984E1 General Operating Procedures (Cont)
TM 9-2320-279-10-2
(8)
Remove two M977 front adapters (11) from crosstube (7) and Place on
equipment body floor (12).
(9)
Remove lock handle (13), lock plate (14), quick Pin (15), Pin (16), and
two M911 rear tow adapters (17).
(10)
Install
two M977 front adapters (11) removed from crosstube, Pin (16),
quick pin (15), lock plate (14), and lock handle (13).
(11)
Install
two 1-7/16-in. (37 mm) pins and two 5-in. (127 mm) spacer
tubes from stowage.
Change 3
2-435