2-80.
2-80.
TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
NOTE
Make sure there is sufficient clearance between tires of
pusher axle and ground (refer to M911 operator’s
manual).
(44)
Set POWER switch (41) to OFF position.
(45)
Set POWER switch (44) to OFF position.
(46)
(47)
(48)
(49)
Set
PTO
ENGAGE
switch (45) to OFF position.
Turn on service drive lights (para 2-10d).
Turn on emergency flashers on wrecker and disabled vehicle
(para 2-44a).
Push in PARKING BRAKE control (46) and select desired gear
(para2-11e).
WARNING
The M984E1 should not be operated at speeds over 15 mph except on paved roads when the operator
determines that the vehicle being towed and the terrain allow safe operation. Engine brake switch must
be “ON’ for all
towing operations. The following are maximum safe
speeds
Terrain
Maximum speed, towed
Maximum sped, towed
Candition
load Up to 50,000 Ibs
load abave 50,000 Ibs
on road-level
35
30
on road-hilly
30
20
off road
15
15
Speeds in excess of the above can result in loss of control, serious injury or death.
(50)
Transport disabled vehicle.
2-442