TM-9-2320-279-10-2
M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)
OPERATOR’S MANUAL VOLUME 2 OF 2
DECEMBER 1998
CHANGE 3
TM-9-2320-279-10-2 - Page 67 of 819
2-57. OPERATOR/CREW
TM 9-2320-279-10-2
PMCS Tables (Cont)
Table 2-6. M964E1 Operator/Crew
Preventive Maintenance Checks and Services (Cont)
NOTE:
Within designated interval, these checks are to be performed in the order listed.
B-Before Operation D-During Operation A-After Operation W-Weekly M-Monthly
2-34
Item to be Inspected
Procedure: Check for and have repaired, filled,
or adjusted as needed
MATERIAL HANDLING CRANE (CONT)
(4) Move O/R EXT lever (1) to OUT posi-
tion until right outrigger beam (4) is
completely out.
(5) Move O/R EXT lever (2) to OUT posi-
tion until left outrigger beam (5) is
completely out.
(6) Set up outrigger pads (para 2-63b).
Check that two retaining pins are at-
tached to each outrigger pad.
Change 3
Equipment is
not ready/
available if:
Outrigger
beam does
not come
out.
Outrigger
beam does
not come
out.
One retain-
ing pin
missing
from either
pad.
Back to Top
