TM 9-2320-279-20-1
Fuel System Maintenance Instructions (Cont)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Open drain valve (1) and drain fuel-water separator (2).
Remove T-handle (3), preformed packing (4), lid (5), and preformed packing (6).
Remove filter element (7).
Install filter element (7).
Close drain valve (1).
Pour clean diesel fuel into body of fuel-water separator (2) until full.
Wet lid (5) and preformed packing (6) with fuel.
Install preformed packing (6), lid (5), preformed packing (4), and T-handle (3).
b. Follow-on Maintenance.
(1)
Start engine (TM 9-2320-279-10).
(2)
Check engine operation (TM 9-2320-279-10).
(3)
Shut off engine (TM 9-2320-279-10).
END OF TASK
4-10. FUEL-WATER SEPARATOR REMOVAL/REPAIR/iNSTALLATION.
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning/Inspection
f. Follow-on Maintenance
INITIAL SETUP
Models
References
All
None
Test Equipment
Equipment Condition
None
TM or Para
Condition Description
Special Tools
TM 9-2320-279-10 Shut off engine.
None
Special Environmental Conditions
Supplies
None
Solvent, dry cleaning, Item 47, Appendix C
Compound, sealing, pipe thread, Item 18,
General Safety Instructions
Appendix C
No smoking or flames.
Tags, identification, Item 48, Appendix C
Fire extinguisher within reach.
Oil, fuel, diesel, Item 27, Appendix C
Personnel Required
MOS 63S, Heavy wheel vehicle mechanic
4-33