TM 9-2320-279-20-1
Fuel System Maintenance Instructions (Cont)
f. Follow-on Maintenance.
(8)
Connect fuel lines (18 and 19) to
elbows (3 and 6).
(9)
Close drain valve (20).
(10)
Pour clean fuel in fuel-water
separator (4) until full.
(11)
Wet preformed packing (21) with fuel.
(12)
Install preformed packings (21 and 22),
lid (23), and T-handle (24).
(13)
Install drain hose (25) on drain
valve (20).
NOTE
Model B has a guard that protects the
fuel-water separator. Do step (14) for
Model B.
(14)
Install guard (26) with three
screws (27), lockwashers (28), and
nuts (29).
(1)
Start engine (TM 9-2320-279-10).
(2)
Check fuel-water separator connections
for leaks.
(3)
Shut off engine (TM 9-2320-279-10).
4-11. SECONDARY FUEL FILTER REMOVAL/INSTALLATION
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SETUP
Models
All
Test Equipment
None
Special Tools
None
Supplies
Oil, fuel, diesel, Item 27, Appendix C
Personnel Required
MOS 63S, Heavy wheel vehicle mechanic
References
None
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-10 Shut off engine.
Engine cool.
TM 9-2320-279-10 Spare tire removed.
TM 9-2320-279-10 Engine side panel
removed.
Special Environmental Conditions
None
General Safely Instructions
No smoking or flames.
Fire extinguisher within reach.
END OF TASK
Change 3
4-41