TM-9-2320-279-20-1

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; ORGANIZATIONAL MAINTENANCE, VOLUME 1 OF 3

  TM-9-2320-279-20-1 - Page 508 of 985

TM 9-2320-279-20-1
Fuel System Maintenance Instructions (Cent)
14-16. THROTTLE AIR SOLENOID CHECK VALVE REMOVALIINSTALLATION (M984) (CONT).
[
(3)
Remove elbow (4), tee (5), and fitting (8) from check valve (6)
W
/@@
6
‘4-
,7-;
/@
LO
?iii’iii’
E
b. Installation.
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off
harmful vapors, and are harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in well-ventilated area. If
adhesive, solvent, or sealing compound gets on skin or clothing, wash
immediately with soap and water.
(1) Coat threads of elbow (1) and fitting (2) with pipe thread sealing
compound and install in check valve (3).
(Z) Coat threads of tee (4) with pipe thread sealing compound and install in
‘K+
fitting (2).
(3) Coat threads of fitting (5) with pipe thread sealing compound
TA187149
and install check valve (3) on fitting.
(4) Connect three air lines (6, 7, and 8) to tee (4) and elbow (l).
n
c. Follow-on Maintenance.
(1)
Start engine and build air pressure (TM 9-2320-279-10).
(2) Check for air leaks.
(3) Shut off engine (TM 9-2320-279-10).
(4) Install engine left side panel (TM 9-2320-279-10).
END OF TASK
4-56


Back to Top