TM-9-2320-279-20-1

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; ORGANIZATIONAL MAINTENANCE, VOLUME 1 OF 3

  TM-9-2320-279-20-1 - Page 512 of 985

TM 9-2320-279-20-l
Exhaust System Maintenance Instructions (Cont)
5-2. MUFFLER ASSEMBLY REMOVAL/INSTALLATION (CONT).
b.
Installation.
(13)
Remove four nuts (33) and
four screws (34) at base of
muffler strap clamps (35).
Remove muffler (4) and
muffler strap clamps (35).
(14)
Remove two nuts (36),
lockwashers (37), and screws
(38) from muffler strap
clamps (35).
(15)
Remove muffler strap
clamps (35).
(1)
Slide muffler strap clamps (1) over
muffler (2).
(2)
Install, but do not tighten, two
screws (3), lockwashers (4), and
nuts (5).
NOTE
Muffler strap clamps must be
positioned so nuts will face rear of
vehicle when muffler is installed.
(3)
Set muffler (2) with muffler
strap clamps (1) on
brackets (6). Install four
screws (7) and nuts (8), but do
not tighten.
5-4
Change 5


Back to Top