TM 9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
7-34. HORN RELAY REMOVAL/INSTALLATION (CONT).
NOTE
Tag and mark wires before disconnecting.
(2)
Remove four screws (3). Disconnect four wires (4, 5, 6, and 7) and ground wire (8).
(3)
Remove two screws (9) and relay (10).
b. Installation.
(1)
Connect four wires (1, 2, 3, and 4) and
ground wire (5) with four screws (6). Tighten
screws.
(2)
Install relay (7) with two screws (8).
(3)
Install heater compartment
cover (9) with six screws (10).
c. Follow-on Maintenance.
(1)
Connect batteries (para 7-91).
(2)
Check operation of horn relay
(TM 9-2320-279-10).
END OF TASK
7-104