TM 9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
b. Installation.
(1)
Soldier A positions front
composite light (1) in cab (2)
while Soldier B installs two
screws (3) and lockwashers (4).
(2)
Connect three C washers (5) and
three wires (6) at connectors (7).
(3)
Install clamp (8) on three
wires (6) with screw (9)
washer (10), and nut (11).
c. follow-on Maintenance.
(1)
Install brake treadle valve (if
removed) (para 11-10).
(2)
Connect batteries (para 7-91).
(3)
Check operation of front
composite light
(TM 9-2320-279-10).
END OF TASK
7-62. COMPOSITE TAILLIGHT ASSEMBLY REMOVAL/INSTALLATION.
This task covers:
a. Removal (M977, M983, M984, M985)
b. Installation (M977, M983, M984, M985)
c. Removal (M984E1)
d. Installation (M984E1)
e. Follow-on Maintenance
INITIAL SETUP
Models
M977, M983, M984, M984E1, M985
Test Equipment
None
Special Tools
None
Supplies
Tags, identification, Item 48, Appendix C
Personnel Required
MOS 63S, Heavy wheel vehicle mechanic
References
None
Equipment Condition
TM or Para
Condition Description
Para 7-91
Batteries disconnected.
Special Environmental Condition
None
General Safety Instructions
None
7-219