TM-9-2320-279-20-1

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; ORGANIZATIONAL MAINTENANCE, VOLUME 1 OF 3

TM-9-2320-279-20-1 - Page 794 of 985

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-62. COMPOSITE TAILLIGHT ASSEMBLY REMOVAL/INSTALLATION (CONT).

NOTE

There are two types of rear

composite lights. Model A has a

larger lens than Model B.

Removal and installation

procedures are the same for

both. Not all parts are

interchangeable.

Model B rear composite light

has a printed circuit board for

the blackout marker and the

stop lamp.

a.

Removal (M977, M983, M984, M985).

(1)

Remove four screws (1) and

lockwashers (2) from composite

taillight bracket (3).

(2)

Pull four wires (4) from hole (5) until

four connectors (6) are showing.

NOTE

Tag and mark wires before disconnecting.

(3)

Disconnect four wires (4).

(4)

Push wires (4) back through

connectors (6) and remove four C

washers (7).

(5)

Remove two screws (8), lockwashers (9),

and composite taillight (10) from

composite taillight bracket (3).

7-220

Change 3