TM 9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
7-102. DIMMER SWITCH REMOVAL/INSTALLATION.
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SETUP
Models
References
All
None
Test Equipment
Equipment Condition
None
TM or Para
Condition Description
Special Tools
Para 7-91
Batteries disconnected.
None
Special Environmental Conditions
Supplies
None
Tags, identification, Item 48, Appendix C
General Safety Instructions
Personnel Required
None
MOS 63S, Heavy wheel vehicle mechanic
a. Removal.
(1)
Remove two screws (1), lockwashers (2), and dimmer
switch (3).
NOTE
Tag and mark wires before disconnecting.
(2)
Remove three screws (4), washers (5), and disconnect
six wires (6) from dimmer switch (3).
7-370