TM-9-2320-279-20-2

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; ORGANIZATIONAL MAINTENANCE, VOLUME 2 OF 3

TM-9-2320-279-20-2 - Page 478 of 938

TM 9-2320-279-20-2

Cab and Body Maintenance Instructions (Cont)

16-3. STEP REMOVAL/INSTALLATION.

This task covers:

a. Removal

c. Follow-on Maintenance

b. Installation

INITIAL SETUP

Models

All

Test Equipment

None

Special Tools

None

References

None

Equipment Condition

TM or Para

Condition Description

TM 9-2320-279-10 Shut off engine.

Para 7-66

Step clearance light

assembly removed.

Supplies

Special Environmental Conditions

None

None

Personnel Required

General Safety Instructions

MOS 63S, Heavy wheel vehicle mechanic

None

a. Removal.

(1)

Remove four nuts (1) and

screws (2). Remove flexible

step (3) from step (4).

(2)

Remove four screws (5),

lockwashers (6), and

washers (7) from step (4).

Remove step from cab (8).

b. Installation.

(1)

Install step (4) to bottom of

cab (8) with four screws (5),

lockwashers (6), and

washers (7).

(2)

Position ring (9) on bottom of

flexible step (3) toward front of

vehicle. Install flexible step to

step (4) with four screws (2)

and nuts (1).

c.

Follow-on Maintenance.

Install

clearance light assembly (para 7-66).

END OF TASK

Change 2

16-23