TM-9-2320-279-20-2
M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; ORGANIZATIONAL MAINTENANCE, VOLUME 2 OF 3
TM-9-2320-279-20-2 - Page 96 of 938
TM 9-2320-279-20-2
Brake and Air System Maintenance Instructions (Cont)
(11)
Remove eight screws (23), 16 washers (24),
eight nuts (25), and brake spider (26).
b. Installation.
NOTE
Left and right side camshafts and slack
adjusters are installed the same way.
Right side is shown.
(1)
Install brake spider (1) with eight
screws (2), 16 washers (3), and eight
nuts (4).
(2)
Install two bushings (5) and oil seals (6)
in two camshaft brackets (7).
NOTE
Step (3) is for all vehicles except M984E1.
(3)
Position each camshaft bracket (7) with
four screws (8), washers (9),
lockwashers (10), and nuts (11).
(4)
Install grease fitting (12).
NOTE
Step (5) is for M984E1 vehicles only.
(5)
Install two brackets (13) on two
camshaft brackets (7) with two
screws (14), washers (15), screws (16),
lockwashers (17), and nuts (18).
(6)
Tighten eight screws (2).
Change 2
11-18.3
Back to Top
