TM-9-2320-279-34-1

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 1 OF 3

TM-9-2320-279-34-1 - Page 439 of 709

TM 9-2320-279-34-1

Transmission Maintenance Instructions (Cont)

d.

Assembly.

(1)

Install bearing (1) in ground sleeve

bore (2) using bearing installer.

(2)

Set torque converter housing (3) on

wooden blocks.

(3)

Install gasket (4) on torque converter

housing (3).

(4)

Aline holes and install front support

assembly (5).

(5)

(6)

(7)

(8)

(9)

(10)

(11)

(12)

Install three screws (6) across front

support assembly (5).

Install 15 screws (7) around outer edge

of front support assembly (5).

Install screw (8).

Tighten three screws (6), 15 screws (7),

and screw (8) to 36 to 43 lb-ft (49 to

58 N•m).

Install main pressure regulator

valve (9) small end first.

Install main pressure regulator valve

spring (10) and valve stop (11).

Install retainer washer (12) on main

pressure regulator valve spring (10).

Soldier A installs retaining ring (13)

while Soldier B pushes retainer

washer (12).

Change 3

7-61